Wall C Profile
The vertical stud of the partition wall. It sits in the U profiles at floor and ceiling; the plasterboards are screwed to both of its faces. In nine sizes.
Explore the product
Application system
Partition wall system
The wall U profiles are fixed to the floor and the ceiling, the vertical C profiles sit in them, and the plasterboards are screwed to both faces. See where every part goes on the drawing and the material needed for 1 m² in the table.
Where the parts go
Hover over a part in the drawing or pick one from the list; that part's card opens.
Parts in the drawing
Pick a part: its card opens here.
Wall U Profile
The track profile of the partition wall, fixed to the floor and the ceiling. It holds the vertical C profiles in line. In three sizes.
Explore the product
System material
Plasterboard — back face
The board screwed to the back face of the profiles. A material of the system; it is not in our catalogue.
System material
Plasterboard — front face
The boards screwed to the front face of the profiles. A material of the system; it is not in our catalogue.
System material
Insulation board
The insulation layer placed between the profiles. A material of the system; it is not in our catalogue.
System material
Joint tape
Covers the joint line between the two front boards. A material of the system; it is not in our catalogue.
System material
Skirting
The finishing element at the lower front edge of the wall. A material of the system; it is not in our catalogue.
Material for 1 m²
The material needed for one square metre of partition wall, separately for single and double boarding, as it appears in our catalogue.
Single frame. Wall sizes in the catalogue: 50/75 mm, 75/100 mm, 100/125 mm.
| Material | Single board | Double board |
|---|---|---|
| Plasterboard | 2.1 m² | 4.1 m² |
| Wall C profile | 2.00 m | 2.00 m |
| Wall U profile | 0.80 m | 0.80 m |
| Perforated corner profile 90° | Per project detail | Per project detail |
| Joint tape | 3.30 m | 3.30 m |
| Jointing compound | 0.50 kg | 0.50 kg |
| Plasterboard screw | 29 pcs | 3.5×25 mm: 13 pcs; 3.5×35 mm: 29 pcs |
| Plastic plug – washer-head wood screw | 4 pcs | 4 pcs |
Technical values are for information only; contact us for current values.
The parts of the system
Our products used in this system. Sizes and technical values are on the product pages.
-
Wall C Profile
9 sizes · 3000 mm · 0.45–0.60 mm
-
Wall U Profile
3 sizes · 3000 mm · 0.50 / 0.60 mm
-
Perforated Corner Bead (Galvanised) 90° (25×25) – (23×23)
3000 mm · 0.35 / 0.40 mm
Get a quote for the profiles of your partition wall
Write down what you need and we will come back with a quote. A call is enough too.