Ceiling U Profile (28×27)
The perimeter profile fixed to the walls around the suspended ceiling. The ends of the ceiling C profiles sit in it.
Explore the product
Application system
Suspended ceiling system
The ceiling profiles are hung from the slab with hangers, and the plasterboards are screwed to those profiles from below. See where every part goes on the drawing and the material needed for 1 m² in the table.
Where the parts go
Hover over a part in the drawing or pick one from the list; that part's card opens.
Parts in the drawing
Pick a part: its card opens here.
Ceiling C Profile (60×27)
The load-bearing profile of the suspended ceiling. It is hung from the slab with hangers; the plasterboards are screwed to it from below.
Explore the product
Hanger Wire
The hooked wire that hangs the suspended ceiling from the slab. Its length is chosen according to how far below the slab the ceiling will sit; in seven lengths from 200 mm to 1400 mm.
Explore the product
Hanger Clip
Connects the hanger wire to the ceiling C profile. Its sprung form allows the ceiling height to be adjusted on the wire.
Explore the product
Clip
Locks together the C profiles that cross in two layers in the suspended ceiling, at their intersection.
Explore the product
Connecting Piece
Joins two ceiling C profiles end to end and extends the profile run.
Explore the product
System material
Plasterboard
The board screwed to the profiles from below. A material of the system; it is not in our catalogue.
Material for 1 m²
The material needed for one square metre of suspended ceiling, as it appears in our catalogue. Our products link to their own pages.
| Material | Quantity |
|---|---|
| Plasterboard | 1.05 m² |
| Ceiling C profile | 3.30 m |
| Ceiling U profile | 0.80 m |
| Hanger clip | 1.50 pcs |
| Hanger rod | 1.50 pcs |
| Clip | 5 pcs |
| Connecting piece | 1 pc |
| Joint tape | 1.30 m |
| Jointing compound | 0.50 kg |
| Plasterboard screw | 20 pcs |
| Steel anchor | 1.50 pcs |
| Plastic plug – washer-head wood screw | 3 pcs |
Technical values are for information only; contact us for current values.
The parts of the system
Our products used in this system. Sizes and technical values are on the product pages.
-
Ceiling C Profile (60×27)
3000 mm · 0.50 / 0.60 mm
-
Ceiling U Profile (28×27)
3000 mm · 0.50 mm
-
Hanger Clip
120 mm · 1.0 mm
-
Clip
75 mm · 0.80 mm
-
Connecting Piece
90 mm · 0.55 mm
-
Hanger Wire
200–1400 mm · 4 mm
Get a quote for the profiles and accessories of your suspended ceiling
Write down what you need and we will come back with a quote. A call is enough too.